Home > SolarSheat Products - info@yoursolarhome.com > Solar Furnace + Solar Hot Water + PV Backup

Solar Furnace + Solar Hot Water + PV Backup

SolarFurnaceLogo_RGB.jpg
Solar_Boiler_System (1).png
Wall Mounted Collector with 20 Watt PV panel.JPG
PowerPAKK_box (2).JPG
PV_module (3).JPG
PV_module (3).JPG
SolarFurnaceLogo_RGB.jpg
Solar_Boiler_System (1).png
Wall Mounted Collector with 20 Watt PV panel.JPG
PowerPAKK_box (2).JPG
PV_module (3).JPG
PV_module (3).JPG

Solar Furnace + Solar Hot Water + PV Backup

9,299.00

Solar Furnace + Solar Boiler + PV Backup 

The Solar Furnace, Solar Boiler and PV backup is a combined completely off grid (no power source necessary other than the sun) space heating, hot water  and PV Backup system Using the SolarSheat technology, the Thermodynamics solar hot water system, and a PV backup system -  the three systems can provide supplemental heating, hot water and PV backup (solar electricity) to a residence or off grid cottage or cabin.  

Solar Boiler Overview - Single Collector System with PV Power Source

The Solar Boiler collects energy from the sun and converts it into hot water.

Domestic hot water is the second-highest energy cost in the typical household. In fact, for some homes it can be the highest energy expenditure. Solar water heating can now reduce your domestic water heating costs by as much as 65%.

The Thermo Dynamics' Solar Boiler is today's state-of-the-art solar water-heating appliance. Designed to pre-heat the domestic water that is supplied to your conventional water heater, it can result in remarkable savings. It's easy to install and maintenance free. The installation package contains all the necessary hardware and complete instructions. As a homeowner, you can install it yourself or have your local Thermo Dynamics dealer do it for you.

All parts of the system are built to demanding specifications, employing the latest solar technology for maximum performance. The Solar Boiler is manufactured from readily-available components, ensuring lower costs and reliability. The solar collectors are constructed of aluminum, copper, and tempered glass. The assembly incorporates the MICRO-FLO® absorber, a continuous tube with only two connections for effortless installation.


Your investment in clean and natural.

The Solar Boiler is environmentally-friendly. It does not pollute or use valuable non-renewable resources. Even the pump to transport heat from the collectors to the storage tank is powered by the sun. Solar energy is a sound investment in everyone's future, today.

The Solar Boiler is designed for automatic daily and year round operation. A non-toxic glycol solution in the solar collectors eliminates winter freezing problems. A photovoltaic module regulates the proper daily operation of the Solar Boiler and the solar loop circulator turns on only when the collectors are hot enough to heat the solar tank.

As one of Thermo Dynamics' new generation of solar products, the Solar Boiler makes solar energy economically available to your family's needs. It's an investment in reliable performance. 
You have our name on it!


How it works:

Light from the sun strikes the solar collector and heats the black metal Sunstrip absorber underneath the glass cover. This heat is transferred to a non-toxic anti-freeze solution (propylene glycol and water) that is pumped through the collector and returns to the Solar Boiler.

The hot glycol then transfers heat to the water in the storage tank via the Solar Boiler 's heat exchanger. The water is heated repeatedly in this fashion, until the solar tank is hot.


The Solar Boiler is used as a domestic water pre-heater in conjunction with your conventional heating system. Cold water enters the Solar Boiler for initial heating, and is then delivered to the backup or conventional heating system for final heating as required. The conventional system is typically fueled by oil, electricity, propane, natural gas, etc....

Conventional energy requirements can be reduced substantially by using the Solar Boiler, and on many days the Solar Boiler will provide ample hot water without the backup (conventional) heater turning on. In most families, the Solar Boiler will displace up to 65% of the water heating requirements. A typical system for a family of four would include two solar collectors (6 square meters), 270 litres of solar water storage and a photovoltaic module to drive the glycol pump.

 

System Components 

 

QuantityModelDescription

1S32B-P4ft x 8ft Serpentine solar collector, "B", 2 connection ports + sensor well

1SBM-9DC

Solar Boiler Module

- Solar Pump
- Expansion tank
- Glycol Resevoir [complete with 4 liters of glycol]
- Glycol inlet/outlet ports
- Water inlet/outlet ports

1PV2020 Wp photovoltaic module

1K1050Serpentine collector mounting kit [mounts flush to roof]

1K1060PV mounting kit

1K2030-50

50 Copper tube kit [connects collector to Solar Boiler module, 50 ft distance between]

- 50 ft supply copper tube, 3/8" dia
- 50 ft return copper tube, 3/8" dia
- 50 ft 18/4 LVT wire
- 100 ft pipe insulation

1GLYUSM4 liter of Glycol for topping up the system

1TG270SBSolar Boiler™ storage tank, 60 IG with connections

Solar Boiler - How it Works

Solar Boiler Installation Manual

Solar Hot Water Collector Technical Specifications S Series

Solar Furnace - SolarSheat

The Solar Furnace - SolarSheat is a self contained solar air collector that can provide supplemental heat to a residence or building. No power other than the sun is needed to provide heat to a building. 

Solar Furnace - SolarSheat Includes

1 - SolarSheat 1500GS air collector

20  Watt PV cell

Thermostat

Fan, collars, and filter

Wire, screws , harness and sensor

Foam gaskets and grills

Snap lock duct

 

SolarSheat Installation Manual 2.0

SolarSheat 1500GS Specification Sheet

SolarSheat Wall Installation Manual v3.2

 

PV Backup

The PV Backup system can provide emergency power to critical circuits like your refrigerator, lights, well pump and furnace motor.  Optional roof mount, pole mount and flush roof mounting are available.  Complete with a battery box, 2 PV modules, and inverter, the system is ready to plug and play for your critical circuit requirements. 

 

The Solar Power Pakk™ can power your refrigerator (assuming 100 watts), your freezer (assuming 100 watts), your furnace/boiler (assuming 300 watts), most of your electronics devices (assuming 50 watts), and some lighting (assuming 100 watts). But not all at the same time! However, these devices do not generally all operate at the same time. The Solar Power Pakk™ will also power the typical sump pump. 

Wattage: 1000 watts 

Energy - 3.20 kW hours at 120 Volts

Dimensions: 10 1/2" w x 23 1/4" x 18 1/4"h 

Weight: 154 lbs 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Add To Cart